Kodak D4000 - Manual (Page 9)

Setting Up the Printer
1-5
5. When Load Paper appears on the operator panel, unlock and
open the front door.
6. Lift the handle on the paper holder to release the latch, then
open the paper holder.
7. If you are:
• loading the paper for the first time, go to step 10 .
• replacing the paper, continue with the next step.
8. Remove the used paper roll.
9. Remove and save the white and yellow flanges from the used
paper roll.
10. Remove the plastic wrapper from the new paper roll. Do not
remove the label.
11. Align the lugs on the white flange with the notches in the new
paper roll, then insert the white flange into the roll.
12. Insert the yellow flange into the other end of the paper roll.
NOTE: If you do not attach the flanges properly, the paper roll will
not fit into the printer.