Making a test print, Making a test print -10 – Kodak D4000 User Manual

Page 14

1-10

Setting Up the Printer

12. Insert each cassette until it clicks into place.

13. Rotate the thermal head release lever on the left side (labeled

L1) and/or the right side (labeled R1) up to the locked position.

14. Close the front door.

Making a Test Print

Make a test print to check that the printer is installed and set up
correctly.

1. On the operator panel, press

Menu twice until Test Print

Mode appears.

2. Press

Enter to start printing the test print.

3. To exit Test Print Mode, press

Rewind/Unload until

8x10 YMC-YMC or 8x12 YMC-YMC appears.

For more information on using the operator panel in Setup mode,
see

Menu

Enter

Rewind/Unload

Advance/Load