Kodak D4000 - Manual (Page 44)

B-4
Safety and Regulatory Information
Regulatory and Safety Compliance
Safety Complies with UL 60950-1
CAN/CSA C22.2 No. 60950-1-03
EN 60950-1 (2
nd
Ed.)
IEC 60950-1 (2
nd
Ed.)
Tested for Norwegian IT Power systems 240V phase to phase
Electromagnetic
Compatibility (EMC) NOTE: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide
reasonable protection against interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
interference to radio communications. Operation of this
equipment in a residential area is likely to cause
interference in which case the user will be required to
correct the interference at his or her own expense.
This class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
Requirements of the EMC directive 89/336/EEC were met
through compliance with the following:
• EN 55022:2006+A1: 2007
• EN 61000-3-2: 2006
• EN 61000-3-3: 2008
• EN 55024: 1998+A1: 2001+A2: 2003
– EN 61000-4-2 ESD
– EN 61000-4-3 Radiated RF Immunity
– EN 61000-4-4 EFT
– EN 61000-4-5 Surge
– EN 61000-4-6 Conducted RF Immunity
– EN 61000-4-8 Power Frequency Magnetic Field Immunity
– EN 61000-4-11 Voltage Dips and Interruptions