Kodak D4000 - Manual (Page 10)

1-6
Setting Up the Printer
13. Match the colored flanges with the slots of the same color on
the printer, then carefully lower the paper roll into the slots.
14. Remove the label.
15. Close the paper holder.
IMPORTANT: The ribbon must be loaded into the printer (see “Loading
the Ribbon” on page 1-7 ) before the paper automatically
loads and advances.
16. Close the front door.
The printer loads the paper. It then prints a blank sheet—the
portion of the roll that may have fingerprints as a result of
handling. The printing of this sheet does not decrease the print
capacity of the roll. Depending on the size of ribbon that is loaded,
the operator panel displays
8x10 YMC-YMC or 8x12 YMC-YMC.