Norgren Super X Series Valves - Manual (Page 28)

Super X Series Valves
All Dimensions in Inches (mm)
VAL-7-28 Littleton, CO USA Phone: 303-794-2611 www.norgren.com
X3 0644 22
1/4" NPT 5/2 Button Operated Spring Return Valve
‘14’ ‘4’ ‘2’ ‘12’
‘5’ ‘1’ ‘3’
.45 (12) .91 (23)
.26 (7)
2.56 (65)
.91
(23)
.91
(23)
1.18 (30) 1.85 (47)
1.10 (28) 1.61 (41)
1.91 (49) max.
144 max.
2.62 (67) max.
.87 (22) 1/4 NPT
.45 (12) 1.57 (40) min.
Operating Force: 14 lbs (62N)
This valve is suitable for panel mounting and includes a nut and washer.
Panel Hole: Ø.83" (21 mm); Panel Thickness: .31" (8 mm) maximum
X3 0648 22
1/4" NPT 5/2 Button Operated Pilot Return Valve
‘14’ ‘4’ ‘2’ ‘12’
‘5’ ‘1’ ‘3’
.45 (12) .91 (23)
.26 (7)
2.56 (65)
.91
(23)
.91
(23)
1.20 (30)
1.18 (30) 1.85 (47)
1.10 (28) Ø
1.61 (41)
1.91 (49) max.
5.98 (152) max.
2.62 (67) max.
1/4 NPT
.45 (12) 1.57 (40) min.
1/4 NPT
Operating Force: 3 lbs (13N), pilot port ‘12’ at zero bar
Reset Pressure: 30 psi (2 bar) minimum
This valve is suitable for panel mounting and includes a nut and washer.
Panel Hole: Ø.83" (21 mm); Panel thickness: .31" (8mm) maximum
X3 0678 22, X3 0677 22
1/4" NPT 5/2 Lever Operated Valves
‘14’ ‘4’ ‘2’ ‘12’
‘5’ ‘1’ ‘3’
.45 (12) .91 (23)
6,5 Ø
2.56 (65)
.91
(23)
1.18 (30) 1.85 (47) 2.05 (52)
M5x0,8
.93 (24)
1.10 (28)
1.84 (48) .87 (22)
1/4 NPT 5.28 (134)
.45 (12)
.91
(23)
Operating Force: X3 0678 22 = 3.4 lbs (15N)
X3 0677 22 = 3 lbs (13N)
Model X3 0677 02 features a positive detent in each position.
Both models are suitable for panel mounting by means of a bezel kit,
reference 03 3637 64.
Panel Hole: Ø1.22" (31 mm);
Panel Thickness: .31" (8 mm) maximum
X3 3638 22, X3 3678 22, X3 3637 22, X3 3677 22
1/4" NPT 5/3 Three Position Lever Operated Valves
‘14’ ‘4’ ‘2’ ‘12’
‘5’ ‘1’ ‘3’
.45 (12) .91 (23)
.26 (7)
2.56 (65)
.91
(23)
.91
(23)
1.18 (30) 1.85 (47)
.59 (15) .59 (15)
.63 (16)
2.05 (52)
M5x0,8
1.32 (34)
1.10 (28)
1.18 (30) 1.89 (48)
1/4 NPT 5.28 (134)
.45 (12)
Operating Force: X3 3638 22 & X3 3678 22 models = 3.4 lbs (15N)
X3 3637 22 & X3 3677 22 models = 3 lbs (12N)
These valves are suitable for panel mounting by means of a bezel kit,
reference 03 3637 64.
Panel Hole: Ø1.22" (31 mm)
Panel Thickness: .31" (8 mm) maximum