Characteristics and specifications, Specified operating conditions, Absolute maximum ratings – Cirrus Logic CS8421 User Manual
Page 9: Cs8421
DS641F6
9
CS8421
CS8421
2. CHARACTERISTICS AND SPECIFICATIONS
(All Min/Max characteristics and specifications are guaranteed over the Specified Operating Conditions. Typical per-
formance characteristics and specifications are derived from measurements taken at nominal supply voltages and
T
A
= 25°C.)
SPECIFIED OPERATING CONDITIONS
(GND = 0 V, all voltages with respect to 0 V)
ABSOLUTE MAXIMUM RATINGS
(GND = 0 V; all voltages with respect to 0 V. Operation beyond these limits may result in permanent damage to the device. Nor-
mal operation is not guaranteed at these extremes.)
Notes:
1.
Transient currents of up to 100 mA will not cause SCR latch-up.
2.
Numbers separated by a colon indicate input and output sample rates. For example, 48 kHz:96 kHz indicates that
Fsi = 48 khz and Fso = 96 kHz.
Parameter
Symbol Min Nominal
Max
Units
Power Supply Voltage
VD
VL
2.38
3.14
2.5
3.3 or 5.0
2.62
5.25
V
V
Ambient Operating Temperature:
‘-CZ’
‘-CNZ’
‘-DZ’
‘-EZ’
‘-ENZ’
T
A
-10
-10
-40
-40
-40
-
-
-
-
-
+70
+70
+85
+105
+105
°C
°C
°C
°C
°C
Parameter
Symbol
Min
Max
Units
Power Supply Voltage
VD
VL
-0.3
-0.3
3.5
6.0
V
V
Input Current, Any Pin Except Supplies
I
in
-
±10
mA
Input Voltage
V
in
-0.3
VL+0.4
V
Ambient Operating Temperature (power applied)
T
A
-55
+125
°C
Storage Temperature
T
stg
-65
+150
°C