Light Engineered Displays SP Series LIGHTED STATUS PANELS User Manual
Page 2
SP
SERIES
PANELS
LIGHTED STATUS
The SP-1 is constructed of 1/16” steel with a rust-resistant white industrial enamel finish.
Access to the lamps is through a removable side panel. The standard message is available
in a solid red on a white translucent slide-in panel. Other colors and styles are available. The
sign is designed to be mounted on a wall over or adjacent to the door. Mounting holes are
provided for this purpose. The
SP-1 model contains one message; the SP-2 model displays
two messages.
SP-1/115v For 115 VAC Operation - Uses 2 20 watt incandescent lamps.
SP-1/12v For 12 VDC Operation - Uses 4 12v incandescant lamps (250ma.)
SP-1/24v For 24 VDC Operation - Uses 4 24v incandescant lamps (250ma.)
SP-1/Strobe Specify 12 or 24 VDC Operation - Uses 1 strobe assembly (180ma.)
When using the 24 volt models on a supervised signal circuit, a 1N4002 diode must be installed.
Electrical Specifications
Enclosure Specifications
12"
2 1/2”
7 5/8”
Flasher
12 & 24vdc & 110vac
Specift Operating Voltage
L
L
–
–