Light Engineered Displays SP Series LIGHTED STATUS PANELS User Manual
Light Engineered Displays Sensors

The Status Panel features red letters on a white background. The slim 2-1/2” deep box is painted white and is
designed for surface mounting.
The message is bonded to a white acrylic sheet. The sign slides into place and is secured by a removable slide
access panel. The lamps are located behind the message and is easily replaced.
The SP-1 is designed to accomodate a wide variety of applications. It is available for use with 12, 24 and 115
volt power.
General Description
109 Portwatch Way Wilmington, N.C. 28412 Phone: (800) 251-2512 Fax: (800) 251-9878
Internet: www.ledinc.com Email: [email protected]
Graphic Annunciators * Water Leak Detection
Fireman’s Smoke Control Panels * ARA Systems
SP
SERIES
DO NOT ENTER - FIRE SUPPRESSION SYSTEM HAS DISCHARGED IN AREA
PLEASE EXIT ROOM - FIRE SUPPRESSION SYSTEM IS IN PRE-CHARGE CONDITION
DO NOT USE ELEVATOR WHEN LIT - USE STAIRS
EXIT
Typical Messages
PANELS
LIGHTED STATUS
NOTE: Custom messages are available upon request. Please consult the factory for details.