Light Engineered Displays Pull Station Covers - Manual

MODEL
WD-100
WD-200F
WD-200S
WD-300F
WD-300S
General Description
Models
WD
SERIES
Top Row: Flush Mounted / Bottom Row: Surface Mounted
Left Column: Break Panel / Right Column: Pull Door
GUARDS
PULL STATION
The Watchdog family of Pull Station covers come
in a Break Panel or a Pull Door version for cover-
ing flush or surface mount pull stations.
Units are constructed of a durable red copolymer
that will not rust, resists severe temperatures,
stains and weather.
Break Panel units have an aluminum breaker
bar attached to the cover with cable. Mounting
slots are integrated into the unit for proper storing
of the breaker bar when not in use.
Pull Door units require less than 5lbs. of pull
pressure and the door swings down and out of
the way, making it more ADA friendly.
7-5/8“
Break Glass model shown above.
NOTE: Dimensions are same for Pull Door models.
All mounting screws are concealed.
Flush mount depth 2-1/4”
Surface mount depth 3-3/4”
TYPE OF COVER
Break Panel - Key Cover
Flush Mount
Break Panel - Pull Station Fire Alarm
Flush mount
Break Panel - Pull Station Fire Alarm
Surface Mount
Pull Door - Pull Station Cover Fire Alarm
Flush Mount
Pull Door - Pull Station Cover Fire Alarm
Surface Mount
8-3/8“
A Division of:
Light Engineered Displays, Inc.
109 Portwatch Way
Wilmington, N.C. 28412
Phone: (800) 251-2512
Fax: (800) 251-9878
Internet: www.ledinc.com
Email: [email protected]