Kramer Electronics VS-44HDCP - Manual (Page 9)

Figure 2: VS-44HDCP 4x4 DVI Matrix Switcher Rear Panel
# Feature Function
12 IN DVI Connectors Connect to the DVI/HDMI (over DVI-D connector) sources (from 1 to 4)
13 OUT DVI Connectors Connect to the DVI/HDMI acceptors (from 1 to 4)
14 RS-232 9-pin D-sub (F) Connector Connect to a PC or the serial remote controller (see Section 10 )
15 ETHERNET RJ-45 Connector Connect to a PC or other Ethernet controller via a LAN (see Section 10 )
16 RESET Button Press and hold while powering on the device to reset to factory default IP settings (see
Section 6.6 and see Section 10 )
17 REMOTE IR 3.5mm Mini Jack Connect to an external IR receiver unit for controlling the machine via an IR remote controller
(instead of using the front panel IR receiver), see
Section 7.3
18 Power Connector with Fuse AC connector, enabling power supply to the unit
19 POWER Switch Switch for turning the unit ON or OFF
6
VS
-4
4
HD
CP
–
Ov
e
rv
ie
w