Kramer Electronics VS-44HDCP - Manual (Page 7)

4
VS-44HDCP - Overview
3 Overview
The VS-44HDCP is a high quality 4x4 DVI matrix switcher. It reclocks and
equalizes the signals and can route any input to any or all outputs simultaneously.
It accepts up to four DVI/HDMI (over DVI-D connector) inputs and routes the
selected DVI input signal to any or all of four DVI/HDMI outputs.
DVI-D (Digital). Note that only the digital signal (DVI D) is available on the DVI connector.
In particular, the VS-44HDCP features:

Up to 6.75Gbps data rate (2.25Gbps per graphics channel)
Suitable for resolutions up to UXGA and 1080p at 60Hz

Support for HDCP (High Definition Digital Content Protection)

HDMI Support
– HDMI (3D, Deep Color, x.v.Color™, Lip Sync)

3D pass-through

Support for up to 7.1 multi-channel audio

I- EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent EDID
handling and processing algorithm ensures Plug and Play operation for
HDMI systems
 Kramer reKlocking™ and Equalization Technology that rebuilds the digital
signal to travel longer distances

A LOCK button to prevent unwanted tampering with the buttons on the front
panel

Eight reset memory locations for quick access to common configurations

Support for Kramer Protocol 2000 and Protocol 3000
You can control the VS-44HDCP using the front panel buttons or remotely via:

RS-232 serial commands transmitted by a touch screen system, PC or other
serial controller

The Ethernet port

The Kramer infrared remote control transmitter

The infrared remote extension cable transmitter (optional), see Section
7.3