Kramer Electronics VS-44HDCP - Manual (Page 15)

12 VS-44HDCP - Operating the VS-44HDCP 4x4 DVI Matrix Switcher
6.4 Locking and Unlocking the Front Panel
To prevent unintended tampering with the unit via the front panel buttons, lock
your VS-44HDCP.
To lock/unlock the VS-44HDCP:

Press and hold the PANEL LOCK button on the front panel to toggle the
locking/release of the front panel buttons
6.5 Acquiring the EDID
You can acquire the EDID from:

A single connected output to one or more of the four inputs (see
Section
6.5.1
)

Several sets of inputs and outputs (see Section
6.5.2
)

The default EDID (see Section 6.5.3 )
6.5.1 Acquiring an EDID from a Single Connected Output
To acquire or change the EDID of a new output display:
1. Connect the required acceptor to the output from which you want to acquire
the EDID.
2. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
3. Press the IN SELECT button to which the EDID is to be copied.
The selected input number flashes on the display.
4. Select the OUT SELECT button from which the EDID is to be acquired.
5. Press the EDID button.
The EDID is stored when the display returns to normal and the EDID and
STO buttons stop flashing.