Festo Контроллер крайних положений SPC11 - Manual (Page 35)

2. Parameters of the SPC11 for the DNCI or DDPC
2-7 Festo P.BE-SPC11-DNCI-EN en 1208a English
The parameters listed in the following tables match exactly
the specified combinations of valves, drives with correspon-
ding stroke length, mass loads and mounting positions.
Please note
Faultless operation can only be guaranteed if all compo-
nents are fitted correctly.
• Use only the specified combinations of valves, drives
and mass loads.
• Observe the installation instructions in chapter 1 as well
as in the system manual.
• Make sure in particular that the drive and measuring
system are installed symmetrically and are free of play.
2.3 Parameters for the DNCI or DDPC
See following tables.
The parameters apply accordingly to vertical applications,
thereby result then other time values.