Festo Контроллер крайних положений SPC11 - Manual (Page 21)

1. Installation instructions for the DNCI or DDPC
1-7 Festo P.BE-SPC11-DNCI-EN en 1208a English
Compressed air tubing and screw connectors (
4 )
See system manual type P.BE-SPC11-SYS...
• Arrange the tubing between the valve (MPYE-5-...) and the
drive (DNCI/DDPC) symmetrically.
Recommendation: Tubing length = nominal stroke length
+ 50 mm
• Cut the tubing and the connectors to the required length
as shown in the following table:
Horizontal or vertical mounting position
Nominal stroke
length in mm
1)
Valve type MPYE-... Screw connectors for Tube type
PUN
MPYE-... DNCI/DDPC
DNCI-32-...
100 ... 400 MPYE-5-1/8-LF-010B QS-1/8-8 QS-1/8-8 PUN-8x1.25
500 MPYE-5-1/8-HF-010B QS-1/8-8 QS-1/8-8 PUN-8x1.25
DNCI-40-...
100 ... 250 MPYE-5-1/8-LF-010B QS-1/8-8 QS-1/4-8 PUN-8x1.25
320 ... 500 MPYE-5-1/8-HF-010B QS-1/8-8 QS-1/4-8 PUN-8x1.25
DNCI-50-...
100 ... 250 MPYE-5-1/8-LF-010B QS-1/8-8 QS-1/4-8 PUN-8x1.25
320 ... 400 MPYE-5-1/8-HF-010B QS-1/8-8 QS-1/4-8 PUN-8x1.25
500 MPYE-5-1/4-010B QS-1/4-10 QS-1/4-10 PUN-10x1.5
DNCI-63-...
100 ... 160 MPYE-5-1/8-LF-010B QS-1/8-8 QS-3/8-8 PUN-8x1.25
200 ... 320 MPYE-5-1/8-HF-010B QS-1/8-8 QS-3/8-8 PUN-8x1.25
400 ... 500 MPYE-5-1/4-010B QS-1/4-10 QS-3/8-10 PUN-10x1.5
1)
Nominal stroke lengths not listed are available upon request