Muxlab LongReach II Active CCTV Receiver Hub - Manual (Page 6)

© MuxLab. LongReach II Active CCTV Receiver Hub Installation Guide
Page 6
2.
Technical Specifications
Specifications
Environment CCTV composite baseband video; NTSC,
PAL, SECAM
Devices CCTV cameras, monitors, DVR, switchers,
IP encoders, and other CCTV equip.
Transmission Transparent to the user
Video
Bandwidth 20 Hz to 8 MHz.
Input 1.5 Vp-p max, 100Ω, balanced (RJ45)
Output 1.1 Vp-p, ± 1 dB, 75Ω, unbalanced (BNC)
Insertion Loss -14 dB minimum for luma, -60 dB minimum
for chroma. Determined by Automatic Gain
Control.
Return Loss Greater than 15 dB over the frequency
range
Common Mode Rejection Ratio Greater than 40 dB @ 3.85 MHz
Ground Loop Isolation Up to +/-50VDC
Video Signal Polarity Automatically adjusts for any polarity
Max. Distance via Cat5e/6 Passive interface balun: 5,000 ft (1.5 km)
Active interface balun: 7,000 ft (2.1 km)
Max. Distance via coax RJ59 30’ (9 m) between the unit and TV monitor
Diagnostics LED 1: ON if power present, LED2: ON if
video signal present
Video Controls Automatically adjusts for gain, sharpness
and luminosity