Muxlab LongReach II Active CCTV Receiver Hub - Manual (Page 13)

© MuxLab. LongReach II Active CCTV Receiver Hub Installation Guide
Page 13
3.3. Installation Procedure
1. For video-only applications, connect the passive
CCTV Balun (500000 or 500009) to the CCTV
camera video output port.
2. Connect one twisted pair to the passive CCTV
Balun. If the balun is the 500009, use a small flat-
head screwdriver. If the balun is the 500000, crimp
RJ45 modular plug to the end of the cable, ensuring
that Pins 7 & 8 of the RJ45 are connected to a
twisted pair.
3. To transmit remote power and video, the 500024
balun may be used. Refer to specification table and
respect distance limitations. Set the slide switch on
the LongReach II Hub to “500024/29”. Connect the
outputs of the 3
rd party CCTV power supply to the
remote power terminals on the hub.