beautypg.com

Installation procedure – Muxlab Active VGA Balun II Kit User Manual

Page 10

background image

© MuxLab Inc. Active VGA Balun II Family Installation Guide

Page 10

3.4.

Installation Procedure

Verify that the distance between the Active VGA
Balun II transmitter and receiver are within MuxLab
specifications (see Technical Specifications). In order to
install the transmitter, please follow the steps below:

1. Connect the transmitter to the video source with a

VGA jumper cable.

2. (Optional) Connect a local monitor to the transmitter

with a VGA jumper cable.

3. Connect a length of Category 5e/6 (or higher) UTP

cable to the transmitter. Ensure the wiring is
according to EIA 568 A or B. and straight-thru.

4. Connect the 12 VDC power supply first to the

transmitter and then plug the power supply into an
AC power outlet. If power is present, the green
power LED will be ON.