Aastra Telecom M6320 - Manual (Page 44)

5. Run the free end of the line cord through the “E” hole in the stand
“F”. Slide the cord under the retaining tabs “B” (allow a little slack).
Refit the stand in high or low position.
6. Turn the M6320 right-side up and position it on your desk, ensuring
that line cord runs through slot “G”.
7. Insert the free end of the line cord into the open jack (Z) on the plas-
tic connector (Y).
8. Insert the free end of the plastic connector (X) into the wall jack (W).
9. Plug in the AC adaptor (V) into a AC 110V wall socket (U).
43
Connecting your M6320: continued
Figure 2 – Wall jack/AC adaptor connections
V
U
Y
Z
X
W