Aastra Telecom M6320 - Manual (Page 14)

Time and Date
To set the time and date on your M6320:
1.
Press
b
.
2. Press
@
until Time and Date Set? is shown on the dis-
play.
3. Press
a
.
4. Enter the date using the format shown on the display.
5. Enter the current time based upon the 24 hour clock.
6. Press
a
to save the new time and date settings.
7. Press
b
or
r
to exit programming mode.
To select the time and date display format:
1.
Press
b
.
2. Press
@
until Time and Date Format? is shown on the
display.
3. Press
a
.
4. Press
@
until the desired format is shown on the display.
5. Press
a
to save the new format setting.
6. Press
b
or
r
to exit programming mode.
Call Timer
The Call Timer uses the display to show the time elapsed since the start
of a normal call (the timer appears on the display 5 seconds after the
call starts and remains on the display 5 seconds after you end the call).
Follow the instructions below to enable the Call Timer.
To enable the Call Timer:
1.
Press
b
.
2. Press
@
until Call Timer? is shown on the display.
3. Press
a
.
4. Press
@
to enable or disable the Call Timer.
5. Press
a
to save the new setting.
6. Press
b
or
r
to exit programming mode.
13
Setting up local features: continued