Aastra Telecom M6320 - Manual (Page 18)

17
The set has two operational modes Handsfree (default mode) and ACD mode.
The handsfree mode is intended to give the user a high level of features, some
of which are listed below.
• Handsfree operation by pressing the selector key.
• Dual headset working (only 1 operates in transmit mode) in conjunc-
tion with the handset.
In ACD mode the set is designed for call centre working and has the following
design features:
• Dual headset working (only 1 operates in transmit mode at a time).
The speech transmit path can be switched between headsets using the
selector key.
To select the mode of operation:
1.
Press
b
.
2. Press
@
or left/right cursor keys until Mode Selection? is dis-
played.
3. Press
a
or the down scroll key to show Handsfree Mode or ACD
Mode.
4. Press
@
or left/right cursor keys until the require mode is displayed.
5. Press
a
or the down scroll key to save the setting.
6. Press
b
or
r
to exit the program mode.
To enable the large red LED at the top of the set to illuminate when a message
is waiting, you will have to indicate to the phone which feature key is assigned
to the network feature 'message waiting'.
To program the message waiting key:
1.
Press
b
.
2. Press
@
or left/right cursor keys until Message Waiting? is
displayed.
3. Press Hold
a
or the down scroll key to show Msg Wait key
Unassigned .
4. Press a feature key to assign that key to the message waiting function or
press
r
to unassign the function.
5. Press
a
or the down scroll key to save the setting.
6. Press
b
or
r
to exit the program mode.
Setting up local features: continued
Mode Selection
Message Waiting