Using the chooser the first time you print 17, Using the chooser the first time you print – Apple Personal LaserWriter300 User Manual
Page 25
Using the Chooser the first time you print
You use the Chooser desk accessory to tell the Macintosh where
to send print jobs.
In the Chooser, you choose the port to which you connected the
Personal LaserWriter 300, and can also choose among printers
connected to your network, if any.
S
Important: Once you choose the printer in the Chooser, you
won’t need to repeat this step unless you change printers or
change the way your printer is connected.
S
1. Choose the Chooser from the Apple (K) menu.
2. After you choose the printer, close the Chooser.
Chapter 3: Printing 17
First click the
LaserWriter 300
icon in this box.
Then click the serial port
that you used to connect
the printer.
Click here to share the
printer over a network
or to create a log of
printed jobs. See
“Sharing Your Printer
With Other Users.”
Be sure to make
AppleTalk inactive if
your computer is not
on a network and
you connected the
printer to the printer
port (marked with
the icon [).
Background Printing lets
you use your computer
for other things while it
is printing. For details,
see the Print Monitor
instructions in your
Macintosh User’s Guide.