Apple Personal LaserWriter300 - Manual (Page 15)

Adding Toner and Paper
This chapter tells you how to install a toner cartridge into the
printer and load paper into a cassette.
S Important: If you are setting up your Personal LaserWriter
300 for the first time, please add toner and paper
before you
plug your printer into an outlet. Otherwise, a paper jam may
occur when your printer starts up.
S
Removing the plastic shipping restraints
If you are installing a toner cartridge for the first time, you must
remove the two orange plastic shipping restraints from inside the
printer before you can install the cartridge.
1. Open the printer access door.
2. Remove the shipping restraints.
Press on the restraints to remove them.
If you are installing for the first time,
remove the plastic shipping restraints.
Press the release
button to open the
access door.
7
Chapter 2