Apple Personal LaserWriter300 - Manual (Page 17)

4. Pull the tab to remove the tape.
s Warning: Be sure to pull the tape in the direction shown.
Don’t pull it too quickly or at too sharp an angle; otherwise,
the tape may break.
s
5. Insert the cartridge into the printer.
Line up the markings on the sides of the cartridge with the
arrows in the printer.
6. With both hands, press down gently on the cartridge to
secure it in place.
7. Close the access door.
Align arrows.
Pull the tape
completely out.
Pull the tape in the direction
shown. Do not pull it to either
side or it may break.
Chapter 2: Adding Toner and Paper 9