Vaddio Canon VC-C50i Programmers - Manual (Page 186)

185
Stop Initialize
Start Initialize
16.2 Initial Setting
In case of power ON, it is necessary to pedestal initialize at first.
In case of using date and time, it is necessary to set the present time and date.
Host VC-C50i
(1) System Control Command
Extended operation status request
(2) Answer (ACK + Status)
(3)
Pedestal Control Command
Pedestal Initialize 1
(4)
Answer (ACK)
(5) System Control Command
Date Setting (00 year 01 month 02 day)
(6)
Answer
(7) System Control Command
Time Setting (12 hour 34 minute 56 second)
(8)
Answer
(9) System Control Command
Extended Operation Status Request
(10) Answer (ACK + Status)
Corresponding Frame Code
Command/Answer
(1) FF 30 30 00 86 30 EF
(2) FE 30 30 30 30 33 30 30 31 30 EF
(3) FF 30 30 00 58 30 EF
(4) FE 30 30 30 30 EF
(5) FF 30 30 00 91 33 30 30 30 31 30 32 EF
(6) FE 30 30 30 30 EF
(7) FF 30 30 00 91 35 31 32 33 34 35 36 EF
(8) FE 30 30 30 30 EF
(9) FF 30 30 00 86 30 EF
(10) FE 30 30 30 30 30 30 30 30 30 EF