Configure the central-office modem – ADC MM701G2 User Manual
Page 68
Chapter 7: Implementing a Point-to-Point LAN Extension
7-6
Configure the Central-Office Modem
To configure the central-office modem, you need to change the following settings:
• Operating mode for the modem, (see
“Configure the Central-Office Operating Mode” on page 7-6
)
• WAN parameters, (see
“Configure the Central-Office WAN” on page 7-7
)
“Configure the Central-Office LAN” on page 7-8
)
Configure the Central-Office Operating Mode
5
Select Save Changes on the menu bar to access the Save Changes page (
).
Figure 7-7. Save Changes Page
6
Click Save to save the configuration to flash memory.
Step
Action
1
Select DSL on the menu bar; then select Advance Configuration under DSL Options.
Figure 7-8. G.SHDSL Advanced Configuration—Change CO Operating Mode
2
In the Operating Mode box, select CO to configure the modem for this mode.
3
Click Apply.
Step
Action