Shown in – ADC MM701G2 User Manual
Page 27
Chapter 3: Provisioning
3-3
Step
Action
1
Select LAN on the menu bar, then select DNS Relay under LAN Options to access the DNS Relay
mode page (
).
Figure 3-2. DNS Relay Mode Page
2
Select Enabled, then click Configure to access the following DNS: Enable Relay page (
Figure 3-3. DNS Enable Relay Page
3
Enter the DNS server IP address for the device to which the modem will forward IP address resolution
requests.
4
Click Apply.
Note:
If DHCP Client is selected (see
“Configure the LAN” on page 3-1
) and a DNS server IP
address assigned, then DNS: Enable Relay is automatically enabled and the DNS server IP
address automatically displayed in that field.
This manual is related to the following products: