Saving changes, Saving changes -12, Figure 5-12.save changes – ADC MM701G2 User Manual
Page 54: Ibed in, Saving changes” on, D in
Chapter 5: Configuring System Parameters
5-12
S
AVING
C
HANGES
Use the Save Changes page for saving your current configuration to flash memory. This option immediately writes
all current system configuration to permanent memory (NVRAM). You cannot selectively write configuration to
NVRAM. When you issue the save command, all current configuration is written to NVRAM.
Note:
When saving the modem configuration, do not power off the modem while the save is in process.
Step
Action
1
Select Save Changes on the menu bar to access the Save Changes page (
Figure 5-12. Save Changes
This manual is related to the following products: