ADC MM701G2 - Manual (Page 28)

Chapter 3: Provisioning April 14, 2006
3-4 MM70xG2-UM-03
C ONFIGURE DHCP S ERVER M ODE
From the DHCP server mode page, configure the parameters for the modem to function as a DHCP server by either
directly serving IP addresses (DHCP server) or forwarding the request to another device that will provide DHCP
services (DHCP relay agent). If you selected DHCP client when you configured LAN parameters (on page 3-2),
then DHCP server mode is automatically set to Disabled.
Step Action
1 Select LAN on the menu bar, then select DHCP Server under LAN Options to access the DHCP server
mode page.
Figure 3-4. DHCP Server Mode Page