Step 4: set fabric selector step 5: start dryer – Alliance Laundry Systems D677I User Manual

Page 40

Operation

512680

Step 4: Set Fabric Selector

Select NORMAL for cottons, PERM PRESS/

CASUAL for permanent press, DELICATE for

sensitive items or FLUFF (NO HEAT) for items that

require no heat.

NOTE: Always follow manufacturer’s care label

instructions.

Figure 48

Step 5: Start Dryer
Nonmetered Models

Rotate timer knob to desired time setting (up to

60 minutes). Press the PUSH-TO-START button.

IN USE light will come on (indicating start of cycle).

Figure 49

Coin Slide Models

Place coin(s) in slide and carefully push in as far as

possible and then pull slide out as far as possible. After

IN USE light comes on (indicating start of cycle),

press the PUSH-TO-START button.

Remove knits when slightly damp because overdrying

may cause shrinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor

overload protector may have cycled. Refer to

Maintenance section.

NOTE: This machine includes an extended tumble

feature. Starting 20 minutes after a cycle ends, the

cylinder will tumble for two minutes every hour

without heat, up to 18 hours or until door is

opened.

DRY2185N

DRY2101N

NO HEAT

NORMAL

PERM PRESS

CASUAL

FABRIC SELECTOR

DELICATE

NONMETERED MODELS

W297I

Figure 50

W297I

METERED MODELS