American Dynamics ADCTDN0230P User Manual
Page 53
53
Ⅵ Set the B&W/COLOR item to AUTO
1.
Select the item B&W/COLOR on the TITLE/VIDEO screen and press
the SET button.
The B&W/COLOR screen is displayed.
2.
Press the SELECTOR switch up or down (
J, K) and select MODE.
3.
Press the SELECTOR switch left or right (
H, I) and set to AUTO.
4.
Press the MENU button twice.
The setting is complete and the screen returns to the main menu.
Memo:
● When near-infrared illumination is used, a B&W screen may switch to a
color screen if the object reflects light excessively. To perform switching
with higher accuracy, we recommend that you use the settings mentioned
in
AControl by B&W/Color switching signal from externalB (A Pg. 54).
● In the case of B&W/Color mode, the lens performance may cause the
image to be out of focus when the illumination of the object is near-infrared
light. In this case, use a lens that is compatible with near-infrared light.
TITLE/VIDEO
CAMERA TITLE EDIT..
W. BALANCE
AWC
SHUTTER..
GAIN..
E
B&W/COLOR..
BLC MODE
OFF