American Dynamics ADCTDN0230P - Manual (Page 37)

37
Item Functions and settings
INPUT
POLARITY This sets the polarity of the AUX input signal.
MAKE
: When the contact between all alarm input
terminals and GND terminals changes from
open to close, the alarm will activate.
BREAK : When the contact between all alarm input
terminals and GND terminals changes from
close to open, the alarm will activate.
[Default setting: MAKE]
Memo:
● When AUX MODE item is set to AB&W OUTB, A- - -B
will be displayed and settings is disabled.
TITLE/VIDEO screen
Item Functions and settings
CAMERA
TITLE EDIT This item sets the title to be displayed permanently on
the lower part of screen. A maximum of 24 characters
can be set for the title.
ACamera title settingB (A Pg. 48)
W.BALANCE Select ATW or ATW wide for auto tracking white balance
that respond to scene lighting changes. Select AWC
when white balance is fixed and does not respond to
scene lighting changes.
Memo:
● In B&W mode, A- - -B will be displayed and settings is
disabled.
[Default: ATW]
ATW This is the Auto-Tracking White Balance mode.
(Automatic color temperature tracking.) The camera
adjusts the white balance automatically according to the
color temperature of the illumination.
ATW(WI
DE) This mode supports an even wider range of color
temperature than ATW. Use this mode when white
balance cannot be achieved using ATW mode.
ADCTDN2412N_P_EN.book Page 37 Friday, September 28, 2007 12:49 PM