American Dynamics ADCTDN0230P - Manual (Page 43)

43
Item Functions and settings
B&W/COLOR (continued)
MODE
(continued) [Default setting: AUTO]
ZDisplay for ADCTDN2412N. For ADCTDN2412P/
ADCTDN0230P, COLOUR is displayed.
Memo:
To ensure a successful B&W/Color switching
● If the MODE item of B&W/COLOR is set to AAUTOB,
the B&W/Color setting can be switched according to
the brightness of the object, but the condition of
illumination and field angle may make this difficult. To
be absolutely certain of B&W/Color switching, we
recommend you to input signals of an external sensor
(available separately) to the [AUX,GND] external
terminal of this camera before switching. ( A Pg. 54)
ADCTDN2412N_P_EN.book Page 43 Friday, September 28, 2007 12:49 PM