American Dynamics ADCTDN0230P - Manual (Page 45)

45
Item Functions and settings
BLC MODE Sets the backlight compensation function. Set this item
when there is a bright light source in the background of
the object and the object becomes dark. Set such that
unnecessary light source is outside the photometry area.
OFF
: No backlight compensation.
AREA1 to AREA4 : Refer to the diagram below to set
the item.
[Default setting: OFF]
OFF AREA 1 AREA 2 AREA 3 AREA 4
Photometry
area
DISPLAY screen
Item Functions and settings
MONITOR
TYPE This sets the monitor type.
You can change the output video settings according to
the type of monitor used. Select an appropriate mode.
[Setting: CRT,LCD1,LCD2]
[Default setting: CRT]
ADCTDN2412N_P_EN.book Page 45 Friday, September 28, 2007 12:49 PM