Sony KLV-32M1 - Manual (Page 4)

4
CAUTION
Use the following SONY appliance(s) only with the following WALL-
MOUNT BRACKET. Use with other WALL-MOUNT BRACKET may
cause instability and result in possible injury.
SONY APPLIANCE MODEL NO.
KLV-32M1
SONY WALL-MOUNT BRACKET MODEL NO.
SU-LW1
To Customers
Sufficient expertise is required for installing the specified product. Be
sure to subcontract the installation to Sony dealers or contractors and pay
adequate attention to safety during the installation.
As an E NERGY S TAR ® Partner, Sony Corporation has
determined that this product meets the E NERGY S TAR ®
guidelines for energy efficiency.
E
NERGY S TAR ® is a U.S. registered mark.
For customers in the United States
This product contains mercury. Disposal of this product may be
regulated if sold in the United States. For disposal or recycling
information, please contact your local authorities or the Electronics
Industries Alliance (http://www.eiae.org).
Trademark Information
Dolby, Dolby Digital and the double-D symbols are trademarks of Dolby
Laboratories.
TruSurround, TruBass, SRS and the ® symbol are trademarks of
SRS Labs, Inc. TruSurround and TruBass technologies are incorporated
under license from SRS Labs, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 4482866. “BBE” and
BBE symbol are trademarks of BBE Sound, Inc.
This TV incorporates High-Definition
Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Wega, Steady Sound, Digital Reality Creation, and CineMotion are
registered trademarks of Sony Corporation.
Important
Safeguards
Before using your TV, please read these instructions completely, and
keep this manual for future reference.
Carefully observe and comply with all warnings, cautions and
instructions placed on the unit or described in the operating instructions
or service manual.
WARNING
To guard against injury, the following basic safety precautions should be
observed in the installation, use and servicing of the unit.
Use
Power Sources
This unit should be operated only from the type of
power source indicated on the serial/model plate.
If you are not sure of the type of electrical power
supplied to your home, consult your dealer or local
power company. For those sets designed to operate
from battery power, refer to the operating
instructions.
Grounding or Polarization
This unit is equipped with a polarized AC power cord plug (a plug having
one blade wider than the other), or with a three-wire grounding type plug
(a plug having a third pin for grounding). Follow the instructions below:
For the unit with a polarized AC power cord plug
This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug.
If the plug still fails to fit, contact your electrician to
have a suitable outlet installed. Do not defeat the safety purpose of the
polarized plug by forcing it in.
Wall outlet
Do not use a poor fitting outlet.
Insert the plug fully into the outlet. If it is loose, it may
cause arcing and result in fire.
Contact your electrician to have the outlet changed.
Wiring
For your safety, unplug the AC power cord when
wiring cables.
Electric Shock
Do not touch the AC power cord or the unit
with a wet hand.
If you plug/unplug the AC power cord from the
unit with a wet hand, it may cause electric
shock.
Cleaning
Clean the AC power plug regularly.
If the plug is covered with dust and it picks up
moisture, its insulation may deteriorate and
result in fire. Unplug the AC power plug and
clean it regularly.