Sony KLV-32M1 - Manual (Page 29)

29
Connecting and Setting the TV
VIDEO IN
1
3
VIDEO S VIDEO AUDIO
R L (MONO)
CENTER SPEAKER
IN
180W (6 ) MAX
HD/DVD IN
AUDIO OUT
(VAR/FIX)
P B Y L R P R
AUDIO 4
R L
Connecting a DVD Player with Component Video
Connectors
Use this hookup if:
• Your DVD player has component (Y, P
B
, P
R
) jacks.
Tips
• The Y, P
B
and P
R
jacks on your DVD player are sometimes labeled as Y, C
B
and C
R
, or Y,
B-Y and R-Y. If so, connect the cables to the matching colors.
• To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to
16:9 on your DVD player. For details, refer to the operating instructions supplied with your
DVD player.
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the DVD player’s Y, P
B
and P
R
jacks to the Y, P
B
and P
R
jacks on the TV. Use the HD/DVD 4 IN
connections.
2
Using an AUDIO cable, connect the DVD player’s AUDIO OUT jacks to
the TV’s AUDIO IN jacks.
Note
The Y, P
B
and P
R
jacks do not provide audio, so audio cables must be connected to
provide sound.
Rear of TV
P
R
P
B
Y
AUDIO cable
(not supplied)
Component video cable
(not supplied)
DVD Player
AUDIO-L (white)
AUDIO-R (red)