Karcher B 60 W Bp Pack Dose User Manual

Page 10

Interval: at least 3 times a week
Î

Pull the suction hose off the suction bar
and appliance.

Remove coarse dirt by hand.

Submerge hose into strong alkaline de-
tergent solution (KÄRCHER RM 750,
30 %).
If the detergent is mixed with water of a
temperature of 60 °C, this will increase
the cleaning effect.

Let the detergent solution soak for 10 to
15 minutes.

Rinse the hose with a strong water jet to
remove the dirt - even from the indents.

Tip
The cleaning effect can be enhanced by

using a hot water high pressure cleaner.

Observe the spray distance to prevent

damage.
Î

Let the hose dry.

Reinstall the hose.

Interval: at least 3 times a week
Î

Remove the drain hose from the appli-
ance (tools required).

Remove coarse dirt by hand.

Submerge hose into strong alkaline de-
tergent solution (KÄRCHER RM 750,
30 %).
If the detergent is mixed with water of a
temperature of 60 °C, this will increase
the cleaning effect.

Let the detergent solution soak for 10 to
15 minutes.

Rinse the hose (inside and outside) with
a strong water jet to remove the dirt -
even from the indents.

Tip
The cleaning effect can be enhanced by
using a hot water high pressure cleaner.
Observe the spray distance to prevent
damage.
Î

Let the hose dry.

Reinstall the hose.

Interval: daily after use.
Î

Remove coarse dirt from the wheels
and steering rollers.

Clean the outside of the appliance and
the wheels with a clean brush and dis-
infectant cleaner RM 732.

Rinse the exterior of the appliance, the
wheels and steering rollers thoroughly
with fresh water.

Check the cleaning result, repeat the
cleaning process if required

Let the exterior of the appliance, the
wheels and steering rollers dry before
reusing the appliance.

Tip
The cleaning effect can be enhanced by
using a hot water high pressure cleaner.
Caution
Risk of damage. Do not direct the high
pressure jet onto the wheel bearing.
Î

Check the wheels and rollers for dam-
age or cracks. Damaged wheels or roll-
ers must be replaced immediately by a
KÄRCHER Service Partner.

Caution
Risk of increased bacterial migration. Have
damaged wheels or steering rollers re-
placed immediately.

Interval: daily after use.
The regular and proper cleaning of the
cleaning brushes is a basic requirement for
the professional implementation of the
HACCP concept.
Î

Remove the brushes from the appli-
ance as described in the appliance's
operating instructions.

Remove coarse dirt stuck in the bristles
by hand.

Manually clean the brushes under run-
ning cold water.

Spray the brush with a high-dose alka-
line detergent solution (spray bottle,
KÄRCHER RM 750, 30 %).

Let the detergent solution soak for 10 to
15 minutes.
Do not let the detergent dry on, respray
if necessary.

Thoroughly rinse the entire brush sur-
face with a strong water jet.

Tip
The cleaning effect can be enhanced by
using a hot water high pressure cleaner.
Observe the spray distance to prevent
damage.
Î

Let the brushes dry.

For the safe elimination of bacteria, we
recommend spraying the brush with a
disinfecent (e.g. KÄRCHER disinfect-
ant RM 735).

Important
Observe the directions provided by the
manufacturer of the disinfectant.

1 Top side
2 Bottom side
3 Splash guard

Interval: at least 3 times a week

Turn off the appliance.

Pull out the mains plug or the battery
plug.

Remove coarse contaminants from the
casing.

Coat or spray resistant dirt deposits
with alkaline detergent solution (e.g.
KÄRCHER RM 750, 10 %).

Let the detergent solution soak for 10 to
15 minutes.
Do not let the detergent dry on, rewipe
or respray if necessary.

Rinse the brush casing with a water jet
or a water-soaked sponge.

Caution
Risk of damage. Do not direct the water jet
directly into the brush drive or onto electri-
cal connections.

Suction hose

Dirt water discharge hose

Appliance exterior, wheels, steering

rollers

Disc brushes, roller brushes

Cleaning head

Top side

This manual is related to the following products:

B 60 W Bp Pack