HID veriCLASS Reader Platform Quick Start Guide - Manual (Page 6)

Page 6 December 2011
© 2010, 2011 HID Global Corporation. All rights reserved.
veriCLASS Quick Start Guide 3300-901, B.2
Registration & Latest Updates
You must register your product for access to current software releases, news and the
latest product documentation.
Visit www.hidglobal.com/veriCLASS > click Register Your Developer Kit
( Quicklinks tab). You will find the product part number and license key on the
box of your Developer Tool Kit (DTK).
Click Recent Updates and select the files for download.
Connecting to your veriCLASS reader
1
Connect either one or both antennas supplied to the development board.
2
Connect the veriCLASS reader to a USB port on your host PC through the
supplied USB cable.
3
Driver Management
During installation two drivers are installed onto your computer.
• HID veriCLASS Smart Card Reader for USB/CCID
• HID USB for CDC EEM Ethernet adapter
This is used for Ethernet emulation over USB.
HID USB / CCID Driver
The HID USB/CCID driver installs automatically.
HID USB CDC EEM Driver
(Ethernet Emulation Mode)
The HID CDC EEM USB driver allows the veriCLASS reader to behave as a TCP/
IP device over a USB connection. It is essential that your host machine is configured
correctly.
When the veriCLASS reader board is connected using the supplied USB cable it
automatically assigns an IP address.
Open a web browser and enter the following address
http://192.168.63.99/ to verify you
are connected to your veriCLASS reader.