HID FARGO C50 Quick Start Guide - Manual

Direct-to-Card Printer
FARGO® C50
Pull open the ribbon cartridge door.
3
Remove the brace from the ribbon cartridge. Insert ribbon cartridge.
Close ribbon cartridge door.
1
2
Do not connect the USB cable at this time.
The USB cable is connected during driver
installation.
Insert cards. Close card hopper door.
2
Open new ribbon packaging and pull liner tab.
12
Follow the on-screen instructions for
installing the printer driver. 1
2
3
1) Connect AC power cable to
power supply.
2) Insert the opposing AC power
cable end into the AC outlet.
3) Connect power supply to
printer.
PLT-01276, 1.0
For additional information, visit support.hidglobal.com
This Quick Start Guide is for informational purposes only. HID makes no warranties, expressed or
implied, in this summary. Company, product names and data used in sample output are fictitious.
Specifications are subject to change without notice.
HID GLOBAL, HID, the HID logo and Fargo are the trademarks or registered trademarks of HID Global
Corporation, or its licensors, in the U.S. and other countries.
©2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
1) Open the card hopper door.
2) Press lever card platform.
Open output hopper door.
• Power Supply
• US Power Cord
• European Power Cord
• Declaration of Conformity
• Software Installation CD
(includes C50 User Guide and
Fargo Workbench Printer Utility)
Included with your printer are the following items:
Microsoft, Windows and the Windows
logo are trademarks, or registered
trademarks of Microsoft Corporation in
the United States and other countries.
All configurations without
a lamination module are
ENERGY STAR qualified
printers.
1 4
5 6 7 8
9 10 11
QUICK START GUIDE