HID Wallix and ActivID AAA - Manual (Page 4)

4TRESS AAA and Wallix AdminBastion | Integration Handbook
External Release | © 2012-2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved. Page | 4
2.0 AdminBastion Configuration
This chapter describes how to manage WALLIX AdminBastion. When a user signs into a WALLIX AdminBastion
appliance, the WALLIX appliance forwards the user’s credentials to an authentication server to verify the user’s
identity. You will create a new RADIUS server instance for the 4TRESS AAA server to validate the user’s one
time password generated by a token.
2.1 Procedure 1: Create New RADIUS Server Instance
When an external RADIUS server is used to authenticate WALLIX users, you must configure the RADIUS server
to recognize the WALLIX as a client, and you must specify a shared secret for the RADIUS server to use to
authenticate client requests. To configure a connection to the RADIUS server on the WALLIX AdminBastion
appliance, perform the following steps.
1. On the main tab of the navigation pane, expand WAB Configuration, and then click External
Authentication.
2. Specify the following:
• Name/label of the authentication
• IP address or server FQDN
• RADIUS port
• Pre-shared-key
3. Click Apply.