HID Juniper and 4TRESS AS User Manual

Page 7

ActivIdentity 4TRESS FT2011 Web Tokens and Juniper Secure Access | RADIUS Channel Integration Handbook

P 7

4. Select the

Authentication required to search LDAP option, and then enter the appropriate Admin DN and

Password.

5. In the

Finding user entries section, specify a Base DN from which to begin searching for user entries, and

make sure that the

Filter is correct (for example:

samaccountname=).

6. At the bottom of the dialog, click

Save Changes (not illustrated).

2.2

Procedure 2: Create New RADIUS Authentication Server

When using an external RADIUS server to authenticate Juniper SA users, you must configure the server to

recognize the Juniper SA as a client and specify a shared secret for the RADIUS server to use to authenticate the

client request. To configure a connection to the RADIUS server on an SA Series SSL VPN appliance, perform the

following steps.

Getting Started

1. In the Admin

console, expand the

Authentication

menu, and then

click

Auth. Servers.

2. From the

New drop-down list, select Radius Server,

and then click

New Server.

The following dialog is displayed.