HID Cisco ASA and 4TRESS AS User Manual

Page 30

ActivIdentity 4TRESS Authentication Server (FT2011) Web Tokens and Cisco ASA | Integration Handbook

P 30

# 4TRESS Activation

# -----------------

application.config.4tress.activation.token.web.device.type=DT_W_OE_NP

application.config.4tress.activation.token.web.auth.type=AT_CUSTOTP

application.config.4tress.activation.token.pc.device.type=DT_STP_OE

application.config.4tress.activation.token.pc.auth.type=AT_CUSTOTP

application.config.4tress.activation.token.mobile.device.type=DT_STM_OE

application.config.4tress.activation.token.mobile.auth.type=AT_CUSTOTP

#This value must be equal to the PIN value {0,1} contained in the "Soft Token

Engine init string" entry for the

#Device Adapter defined in the Device Types corresponding of the key

application.config.4tress.activation.token.web.device.type

application.config.4tress.activation.token.web.pin=0

5. Save your changes.

3.6

Activate LDAP Authentication on the Soft Token Portal

Edit the Soft Token Activation Portal channel settings.

1. Logged into the Management Console, under

Policies in the pane to the left, click Channels.

2. Select the

Soft Token Activation Portal option.

3. Select the option to enable LDAP fallback authentication when no credential exists, as illustrated next.

4. Restart the server. For details, refer to the ActivIdentity 4TRESS Authentication Appliance Setup Guide.