0 introduction, 0 configuring for two-factor radius authentication – HID ActivID 4TRESS AS and Citrix XenApp User Manual

Page 2

ActivIdentity 4TRESS Authentication Server | Handbook: Configuring Citrix® XenApp™ for Two-Factor Authentication

P 2

1.0 Introduction

This handbook describes how to configure Citrix® XenApp 6.0 for two-factor RADIUS authentication when you

are using an ActivIdentity 4TRESS Authentication Server. Citrix XenApp is a thin client product that enables you

to connect to corporate applications. Citrix XenApp hosts applications on central servers and allow users to

interact with the applications remotely. It also enables the streaming of applications to user devices for local use.

2.0 Configuring for Two-Factor RADIUS Authentication

1. On the server where Citrix XenApp is installed, navigate to the web.config file located in the following

directory:
C:/inetpub/wwroot/Citrix/XenApp/

2. Under

Computer, select Local Disk (C:), and then highlight web.config .

3. To edit the web.config file, right-click, and then select

Edit.

4. Add the 4TRESS RADIUS shared secret location and the 4TRESS RADIUS server information. Specifically,

edit the following lines: