ROTHENBERGER ROWELD ROFUSE Print Plus V2.0 - Manual (Page 20)

ENGLISH 18
Contens Page
1 Introduction 20
2 Safety Instructions 20
2.1 Using the Correct Connection Terminal 20
2.2 Improper Use of the Welding and Power Supply Cables 20
2.3 Securing the Fitting and the Joint 20
2.4 Cleaning the Product 20
2.5 Opening the Unit 20
2.6 Extension Cables on the Worksite 20
2.7 Checking the Product for Damage 21
2.8 Data Interface Cover Cap 21
2.9 Power Supply Specifications 21
2.9.1 Mains Power Supply 21
2.9.2 Generator Power Supply 21
3 Service and Repair 21
3.1 General 21
3.2 Transport, Storage, Shipment 21
4 Principles of Operation 22
5 Check-out and Operation 22
5.1 Turning the Welding Unit On 22
5.2 Entering the Welder ID Code 22
5.3 Connecting the Fitting 23
5.4 Reading the Fitting Code with a Handheld Scanner 23
5.5 Direct Welding with the AutoWeld Feature 23
5.6 Starting the Welding Process 24
5.7 Welding Process 24
5.8 End of Welding 24
5.9 Aborted Welding Process 24
5.10 Cooling Time 24
5.11 Returning to the Start of Parameter Input 24
5.12 Using ViewWeld to Manage Logged Welding Reports, Print Tags,
and Assign Geo-data 24
6 Additional Information in the Welding Report 25
6.1 Entering Preformatted and User-defined Traceability Data 25
6.2 Entering or Changing the Job Number and Joint Number 25
6.3 Entering or Changing Additional Data 25
6.4 Entering the Fitting Traceability Code 26