Nikon S31 User Manual
Page 189
F
11
Te
chni
cal
Note
s and
In
dex
Monitor is blank.
• Camera is off.
• Battery exhausted.
• Standby mode for saving power: Press the power
switch, the shutter-release button,
c (shooting/
playback mode) button, or
b (e movie-record)
button.
• When flash lamp flashes, wait until flash has
charged.
• Camera and computer are connected via USB
cable.
• Camera and TV are connected via audio/video
cable.
Monitor is hard to read.
• Adjust monitor brightness.
• Monitor is dirty. Clean monitor.
Date and time of recording
are not correct.
• If camera clock has not been set, O flashes when
shooting images and recording movies. Images
and movies saved before clock is set are dated “00/
00/0000 00:00” or “01.01.13 00:00” respectively. The
shooting date and time of still images is not
displayed during playback. Set the correct time and
date using Date and time in the camera settings
menu.
• Check camera clock regularly against more
accurate timepieces and reset as required.
Print date not available.
Date and time in the camera settings menu has not
been set.
Problem
Cause/Solution
A