Nikon S70 - Manual (Page 72)

60
Adjusting the Camera Settings in Shooting Mode
More on
Sh
ooting
a Automatic Shooting of a Smiling Face (Smile Timer)
The camera detects smiles on the recognized faces and the shutter is automatically
released.
1
Tap Y.
The smile timer is enabled.
2
Frame a picture.
When the camera recognizes a human face, a
yellow double border (focus area) is displayed
around that face. When focus is acquired on
that face, the double border will glow green for
a moment and focus is locked.
Up to three faces can be recognized. When the
camera detects more than one face, the double
border is displayed around the face closest to the center of the frame, and single border
around the others. When a face framed by a single border is tapped, the single border
changes to a double border and the camera will focus on that face.
3
The shutter is automatically released.
If the camera detects that the face framed by
the double border is smiling, the shutter is
automatically released.
When the camera recognizes a face, the self-
timer lamp (
A 4) blinks. Immediately after the
shutter is released with detection of a smiling
face, the self-timer lamp flickers.
Each time the shutter is released, the camera again initiates face priority function and
smile detection operations for continuous automatic shooting.
The camera smoothes skin tones (in up to three faces) by applying the skin softening
function before recording pictures (
A 120).
9 9
Tap R in shooting mode to adjust the setting.
Y x
Smile timer
Off
9 9
9 9