Nikon S70 - Manual (Page 161)

149
Basic Camera Setup: The Setup Menu
Se
tu
p
M
e
n
u
Sound Settings
Adjust the following sound settings.
Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (
A 21) to save power. Once the camera has entered standby mode, the
power-on lamp will blink.
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.
Press the shutter-release button to cancel standby mode.
B
Notes on Auto Off
Regardless of the option selected, the monitor will remain on as follows:
• When the HOME screen or setup menu is displayed: three minutes
• During slide show playback: up to 30 minutes
• When the AC adapter is connected: 30 minutes (auto off does not function while the camera is
connected to a TV)
B
Notes on AC Adapter Connection
• When the AC Adapter EH-62F (available separately; A 158) is connected, a screen saver function
is activated to prevent screen burn if no operations are performed for the time selected for the
Auto off option. If no operations are performed for an additional 30 minutes, the monitor turns
off. Press the shutter-release button to reactivate the monitor.
• The screen saver function is not activated when 30 min is selected for Auto off.
• The images used for the screen saver are the same as those displayed when u is tapped with
slide show display ( A 98), though no background music is played.
• The screen saver function is not activated, even when no operations are performed for an
extended period of time, and the monitor does not turn off when the camera is connected to a TV
or printer.
Tap B M Setup menu (A 140) M Sound settings
Button sound
Turn button sound On (default setting) or Off. When On (default setting) is
selected, beep will sound once when operations are completed successfully, twice
when the camera acquires focus on the subject, and three times when an error is
detected. Start-up sound will also play when the camera is turned on.
Shutter sound
Choose shutter sound from On (default setting) or Off.
Tap
B M Setup menu (A 140) M Auto off