Nikon D1 User Manual
Page 83
70
14. Center-Weighted Metering Area
By default, center-weighted metering assigns the greatest weight to a circle
in the center of the viewfinder 8 mm (0.32˝) in diameter. The diameter of
the area assigned the greatest weight can be changed to 6 mm (0.24˝), 10
mm (0.39˝), or 13 mm (0.51˝), or exposure can be based on the average
lighting for the entire frame.
Option: 6 Greatest weight assigned to a 6 mm circle
8 Greatest weight assigned to an 8 mm circle (default)
10 Greatest weight assigned to a 10 mm circle
13 Greatest weight assigned to a 13 mm circle
A Exposure based average for entire frame
15. Time Delay for Auto Meter-Switch-Off
By default, exposure indicators are displayed in the control panel on top of
the camera for six seconds after the camera is turned on. This can be
changed to four, eight, or sixteen seconds.
Option: 4 Four-second delay
6 Six-second delay (default)
8 Eight-second delay
16 Sixteen-second delay
16. Self-Timer Duration
When photographs are taken using the self-timer, the default delay
between the time the shutter-release button is pressed all the way down
and the time the shutter is released is ten seconds. The timer can also be
set to delays of two, five, or twenty seconds.
Option: 2 Two-second delay
5 Five-second delay
10 Ten-second delay (default)
20 Twenty-second delay
17. LCD Illumination
By default, the LCD illuminator comes on when the power switch is turned
to
. Using this item, the illuminator can be set to come on when any
button is pressed.
Option: 0
LCD illuminator comes on when power switch is turned to
(default)
1
LCD illuminator comes on when any button is pressed
18. LCD Monitor Auto Power Off
The time the LCD monitor will remain on if no operations are performed
during playback can be set using this item.
Option: 0
Twenty seconds (default)
1
One minute
2
Five minutes
3
Ten minutes
Custom Settings: Custom Settings Options