Nikon D1 - Manual (Page 111)

98
Compatible Speedlights
The D1 can be used with the Speedlights listed below.
1 Can only be used when the SB-28DX is attached. When other Speedlights are
attached and set to TTL, the shutter-release button will lock and no photographs can
be taken.
2 When spot metering is used, this setting is treated as “standard TTL flash control”
(see above).
3 The balanced fill-flash mode used depends on the lens. When a D-Type Nikkor lens
(IX-Nikkor excepted) is attached, 3D multi-sensor balanced fill-flash is used. When
a CPU lens (F3AF excepted) of a type other than type D is attached, multi-sensor
balanced fill-flash is used. If a non-CPU lens is attached, center-weighted fill-flash
is used.
4 The SB-28DX offers two auto modes: non-TTL Auto Flash (A) and Auto Aperture
(AA). AA is used when a lens with a CPU (IX-Nikkor and F3AF excepted) is
attached, A when another type of lens is attached.
Flash Photography: Compatible Speedlights
✔ ✔ ✔ 4 ✔ ✔ ✔ ✔ 3 ✔
SB-28DX
(cordless)
Speedlight
TTL 1 A M REAR
Flash mode
FP high-
speed
sync
Rear-
curtain
sync
Non-TTL
auto
Manual
Repeating
flash
Standard
TTL 2
Balanced
fill-flash
Red-eye
reduction
✔ ✔ ✔ ✔ ✔ — — ✔
SB-28
(cordless)
— ✔ ✔ 5 ✔ — — — ✔
SB-27
(cordless)
✔ ✔ ✔ ✔ ✔ — — ✔
SB-26 6
(cordless)
✔ ✔ ✔ ✔ ✔ — — —
SB-25
(cordless)
— ✔ ✔ ✔ ✔ — — —
SB-24
(cordless)
— ✔ — ✔ ✔ — — —
SB-23,
SB-21B
7 ,
SB-29
(cordless)
— ✔ ✔ ✔ — — — —
SB-22S,
SB-22,
SB-20,
SB-16B,
SB-15
(cordless)
— ✔ ✔ ✔ — — — —
SB-11 8 ,
SB-14