Allied Telesis AT-S21 - Manual (Page 74)

6RIWZDUH#'RZQORDGV
4-20
8VLQJ#;0RGHP
WR#'RZQORDG
6RIWZDUH
Menu: Administration>XModem software update to
this system
Omega supports software downloads to the switch using XModem.
It is assumed that you have the required setup to support this type of
file transfer. This menu is not available through the web browser,
because the Xmodem transfer occurs through the switch’s RS232
management port.
Use the following procedure to set up your switch for an XModem
transfer.
1. Launch Omega’s terminal interface.
2. Select Administration>XModem software update to
this system to display the following:
3. Enter Yes and wait for the following message:
4. Initiate the download from your XModem host.
The Xmodem host displays the download in progress, similar
to the following message:
Ready to receive software upgrade via XModem.
Warning: During software update Management activity is
disabled.
Do Xmodem update now? (Yes or No):
The system host is now ready for download.
Please start your XModem transfer.
Stop
Sending: ATS21 Retries: 0