Allied Telesis AT-S21 - Manual (Page 69)

$70654#8VHU·V#*XLGH
4-15
6WDWLF#0$&
$GGUHVVHV
Menu: MAC Address Table
The static MAC table also includes any configured multicast
addresses. Entering static MAC addresses ensures certain devices
access to the switch’s ports, because aging time, power failures, or
switch resets do not affect the static MAC table.
To enter a static address per port
1. Prepare a list of your devices’ MAC addresses and their port
assignments.
2. Select MAC Address Table>Per port static MAC
addresses to display a similar screen (no MAC addresses have
been configured):
Figure 4-12 Adding Static MAC Addresses to the Ports
3. Enter a MAC address in the Add MAC address field. Use
following format:
XXXXXX XXXXXX
After adding a static MAC address, wait and the display
updates with the changed information; if necessary, return to
the main menu and select
MAC Address Table>All
static MAC addresses to display the updated table.
The static MAC address appears on the Static MAC table. You
can configure only one static MAC address per port.